Preface
IE/PB LINK PN IO
4 Operating Instructions, 11/2017, C79000-G8976-C393-02
Product names and abbreviations
● LINK
In this document, the name "LINK" is used in place of the full product name
"IE/PB LINK PN IO".
● STEP 7
The short form of the configuration tool is used for the following products:
– STEP 7 V5.x
– STEP 7 Professional
The short form "STEP 7" is used only when the product is self explanatory in the context.
● PST
Primary Setup Tool
As an alternative to STEP 7, you can use the PST to configure the address and
PROFINET parameters.
This manual describes the properties of this module and supports you when installing and
commissioning it.
The required configuration steps are described as an overview and there are explanations of
the relationship between firmware functions and configuration.
You will also find information about the diagnostics options of the device.
In this manual there are often cross references to other sections.
To be able to return to the initial page after jumping to a cross reference, some PDF readers
su
ppo
rt the
command <A
lt
>+<Lef
t arro
w>.
● Editorial revision
● New LED description
● Changes in the operating behavior of the C-PLUG
Edition 11/2016
Current manual release on the Internet
You will also find the current version of this manual on the following Internet page of
Siemens Industry Online Support:
To Next Page
Loading...
Need help?
General