IE/PB LINK PN IO
Operating Instructions, 11/2017, C79000-G8976-C393-02
85
As an alternative to the integrated Ethernet interface X1, the LINK supports connection to the
Ethernet network bus adapter of the ET 200SP device family. A BusAdapter does not ship
with the LINK.
The LINK supports the following bus adapters:
● BA 2×RJ45
PROFINET bus adapter with the following connectors:
– 2 x Ethernet jack RJ-45
Article number: 6ES7193-6AR00-0AA0
● BA 2xFC
PROFINET bus adapter with the following connectors:
– 2 x direct connection of the bus cable (FastConnect)
Article number: 6ES7193-6AF00-0AA0
● BA 2xSCRJ
PROFINET bus adapter with the following connectors:
– 2 x fiber-optic cable POF/PCF
Article number: 6ES7193-6AP00-0AA0
● BA SCRJ/RJ45
PROFINET bus adapter, media converter FO - copper with the following connectors:
– 1 x fiber-optic cable POF/PCF
– 1 x Ethernet jack RJ-45
Article number: 6ES7193-6AP20-0AA0
● BA SCRJ/FC
PROFINET bus adapter, media converter FO - copper with the following connectors:
– 1 x fiber-optic cable POF/PCF
– 1 x direct connection of the bus cable (FastConnect)
Article number: 6ES7193-6AP40-0AA0
To Next Page
Loading...
