IE/PB LINK PN IO
Operating Instructions, 11/2017, C79000-G8976-C393-02
81
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC declaration of conformity
The product meets the requirements and safety objectives of the following EC directives and
it complies with the harmonized European standards (EN) for programmable logic controllers
which are published in the official documentation of the European Union.
●
94/9/EC (ATEX explosion protection directive)
Directive of the European Parliament and the Council of 23 March 1994 on the
approximation of the laws of the Member States concerning equipment and protective
systems intended for use in potentially explosive atmospheres
●
EMC directive of the European Parliament and of the Council of December 15, 2004 on
the approximation of the laws of the member states relating to electromagnetic
compatibility.
●
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Process Industries and Drives
Process Automation
DE-76181 Karlsruhe
Germany
You will find the EC Declaration of Conformity for this product on the Internet at the following
address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15406/cert)
Filter settings:
Entry type: "Certificates"
Certificate Type: “EU Declaration of Conformity"
To Next Page
Loading...
