Technical data
6.1 Technical specifications of the LINK
IE/PB LINK PN IO
78 Operating Instructions, 11/2017, C79000-G8976-C393-02
Housing of the ET 200SP device family
Installation on a rail: 35 mm DIN rail
You will find further functions in the section Application and properties (Page 11).
Over and above this, all the information listed in the system manual "Distributed I/O System
ET 200SP" applies to the LINK:
● Electromagnetic compatibility
● Transportation/storage conditions
● Mechanical and climatic environmental conditions
● Information on insulation checks, protection class and degree of protection
For the system manual see /4/ (Page 90).
To Next Page
Loading...
Need help?
General