Siemens Maxum II Reference Manual

2.3.3.3 SIB
SYSCON Interface Board (SIB3) Overview
Compared to the SYSCON2 in previous Maxum II analyzers, the SIB3/CAC3 together with the
Color Touchscreen equipped with a TIB module replaces the SIB2/CAC3 and Color
Touchscreen equipped with a CIM module. This simplifies the internal cabling in the electronics
enclosure.
The SYSCON Interface Board version 3 (SIB3) is a board, with the CAC3 mounted on it,
performs the function of the SYSCON2.1. Unlike the CAC3, the SIB3 is specific to the Maxum
family of products (including the Maxum, the Maxum II, NAU). The combined SIB3 and CAC3
are an electrically and mechanically compatible replacement for the legacy SYSCON board
in the Maxum.
Electronic Compartment Component Descriptions and Maintenance Procedures
2.3 System Controller Version 2.1 (SYSCON2.1)
Maxum II Reference Manual
36 Manual, 7/2017, 2000596-001

Siemens Maxum II Specifications

General

Category	Gas Chromatograph
Measurement Principle	Gas Chromatography
Communication Protocols	Modbus, Ethernet, Profibus
Operating Temperature	-20°C to 55°C
Power Supply	24 VDC or 100-240 VAC
Mounting	rack mount
Applications	Refinery, chemical, petrochemical, natural gas
Detectors	Thermal Conductivity Detector (TCD), Flame Ionization Detector (FID)
Sample Inlets	Multiple
Dimensions	Varies by configuration (e.g., 19" rack mount)