Siemens MICROMASTER 420 Operating Instruction

12 MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
A - Changing the Operator Panel ..............................................................................................109
B - Removing Covers Frame Size A.......................................................................................... 111
C - Removing Covers Frame Sizes B and C ............................................................................. 113
D - Removing ‘Y’ Cap Frame Size A .........................................................................................115
E - Removing ‘Y’ Cap Frame Sizes B and C .............................................................................117
F - User Parameter Settings ......................................................................................................119
G - Applicable Standards ...........................................................................................................121
H - List of Abbreviations.............................................................................................................123
Index ............................................................................................................................... 125

Siemens MICROMASTER 420 Specifications

General

Power Range	0.12 kW to 11 kW
Output Voltage	0 to input voltage
Input Frequency	47 Hz to 63 Hz
Output Frequency	0 Hz to 650 Hz
Overload Capacity	150% for 60 seconds
Enclosure Rating	IP20
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Control Type	V/f control
Braking	Optional braking module
Protection Features	Overcurrent, overvoltage, undervoltage, overload, short circuit, ground fault
Cooling	Air-cooled
Ambient Temperature	-10 °C to +50 °C
Communication Interfaces	USS protocol