Siemens MICROMASTER 420 Operating Instruction

5. SYSTEM PARAMETERS International English
MICROMASTER 420 Operating Instructions 41
6SE6400-5AA00-0BP0
5 System Parameters
This Chapter contains:
♦ A functional overview of the parameters available for customizing your
MICROMASTER MM420 Inverter
♦ A detailed list of the parameters used
(including value range and default setting)
♦ An in-depth description of what the parameter actually does
5.1 Overview of MICROMASTER System Parameters ...... Error! Bookmark not defined.
5.2 Introduction to MICROMASTER System Parameters... Error! Bookmark not defined.
5.3 System Parameters and Definitions ............................. Error! Bookmark not defined.

Siemens MICROMASTER 420 Specifications

General

Power Range	0.12 kW to 11 kW
Output Voltage	0 to input voltage
Input Frequency	47 Hz to 63 Hz
Output Frequency	0 Hz to 650 Hz
Overload Capacity	150% for 60 seconds
Enclosure Rating	IP20
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Control Type	V/f control
Braking	Optional braking module
Protection Features	Overcurrent, overvoltage, undervoltage, overload, short circuit, ground fault
Cooling	Air-cooled
Ambient Temperature	-10 °C to +50 °C
Communication Interfaces	USS protocol