5. SYSTEM PARAMETERS International English
MICROMASTER 420 Operating Instructions 65
6SE6400-5AA00-0BP0
Parameter
Number
Parameter Name
Min
Max
[Default]
Units
♦
♦♦
♦P0003 User
Access Level
♦
♦♦
♦P0004 Setting
♦
♦♦
♦Changeable
♦
♦♦
♦Status
P0918 PROFIBUS address
Defines PROFIBUS address or the address of other option modules. There are two
methods of setting the bus address:
1 via the PROFIBUS module DIP switches
2 via a user-entered value
Possible PROFIBUS Settings:
1... 125
0, 126, 127 are not allowed
0
127
[3]
-
2
20
Parameters changeable viaP0927
Defines how the user is able to change parameters.
Possible Settings:
Setting RS485 USS RS232 USS BOP COMMS module
00 000
10 001
20 010
30 011
40 100
50 101
60 110
70 111
81 000
91 001
10 1 0 1 0
11 1 0 1 1
12 1 1 0 0
13 1 1 0 1
14 1 1 1 0
15 1 1 1 1
Note
This is a binary parameter
E.g. if you want to set value 15, you will need to set the display to indicate 15 in Binary (with
the separating bars in-between “b - - n n” or if you wanted to set 11 – “b - - r n” etc.
0
15
[15]
-
2
20
To Next Page
Loading...
