Siemens MICROMASTER 440 Quick Start Guide

Issue 08/03
2 Quick Start Guide MICROMASTER 440
6SE6400-5GA00-0BP0
Getting Started Guide
Is for quick commissioning with SDP and BOP.
Part Number 6SE6400-5AD00-1AP0
Start-Up Guide
Gives basic information necessary for mechanical installation, quick commissioning,
Analog and Digital I/O settings, common applications with examples and
troubleshooting – specific for the MICROMASTER 440
Part Number 6SE6400-5GA00-0BP0
Operating Instructions
Gives information about features of the
MICROMASTER 440, Installation, Commissioning,
Control modes, System Parameter structure,
Troubleshooting, Specifications and available options
of the MICROMASTER 440.
Part Number 6SE6400-5AW00-0BP0
Parameter List
The Parameter List contains the description of all
Parameters structured in functional order and a
detailed description. The Parameter list also includes
a series of function plans.
Part Number 6SE6400-5BB00-0BP0
Catalogs
In the catalog you will find all the necessary
information to select an appropriate inverter, as well
as filters, chokes, operator panels and
communication options.
Part Number E86086-K5151-A121-A3-7600
www . ElectricalPartManuals . com

Siemens MICROMASTER 440 Specifications

General

Power Range	0.12 kW to 250 kW
Output Voltage	0 V to Input Voltage
Output Frequency	0 Hz to 650 Hz
Control Modes	Vector control
Overload Capability	150% for 60 seconds
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit, Ground Fault
Communication Interfaces	PROFIBUS, DeviceNet, CANopen, Modbus RTU
Enclosure Rating	IP20
Ambient Temperature	-10°C to +50°C
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)