58 Backup and restore
MOBILETT XP Digital SPR8-230.840.30.03.02 Siemens AG
12.05 CS SD 24
Page 58 of 68
Medical Solutions
6-
5Backup and restore
Backup of drive partitions 0
This section describes how to back up all drive partitions (C:\ and D:\) of the CXDI PC with
“GHOST.”
After the startup procedure is complete, one GHOST backup of all drive partitions has to
be created without patient data images.
Preliminary step:
Procedure
• Switch off the MOBILETT XP Digital.
• Open the top cover of the MOBILETT XP Digital, lay it sideways on a table or the like
and access the PC interior. Do not disconnect any cables.
• Open the PC so that it is possible to use the PC keyboard.
• Switch on the MOBILETT XP Digital and press “F2” on the keyboard during boot.
¹ Access the BIOS mode of the computer.
• Enter the BIOS password “99999”.
• In the menu, verify that the first boot device is set to DVD ROM; change it if necessary.
Save changes and exit the menu.
• Insert the system DVD into the CD RW drive to boot from DVD.
¹ The following menu opens:
- 1 - Back up the complete hard drive (c: + d:)
- 2 - Restore the complete hard drive (c: + d:)
- 3 - Back up the complete hard drive (c:
- 4 - Restore the complete hard drive (c:
- 5 - Use GHOST interactive
- E - Exit
¹ Drive c: contains the operating system, drive d: contains the application soft-
ware.
• Label the empty backup CD with the date, "Install" and number it.
• Enter “1” and confirm with “Return”; wait for a message to appear.
• Following the message window,
¹ A DOS window will open on completion of the backup. This concludes the sys-
tem backup of the image system.
• Enter “E” to exit
• Switch off the MOBILETT XP Digital.
• Save all backup CDs in a secure place within the MOBILETT XP Digital.
• Reinstall the PC and the top cover.
- MOBILETT XP Digital system DVD required.
- min. 2 empty recordable CDs (2 items are included in the shipment).
- Delete all test and patient images (local storage and extended storage) from the
CXDI PC!
To Next Page
Loading...
