Siemens AG SPR8-230.840.30.03.02 MOBILETT XP Digital
12.05 CS SD 24
Imaging system overview 9
Page 9 of 68
Medical Solutions
Power box 0
The power box that connects to CXDI PC has basic insulation against the 230V AC and
also has an electric separation device.
Fig. 3: Power box
The power box consists of the following parts:
Function of the power box: 0
The power box controls signal transition with the detector (imaging unit), power supply,
signal transition with the X-ray generator. The power box can be connected to only one
detector (imaging unit).
- 50PCB-XRAY board (X-ray interface board),
- Power supply,
- Remote power switch.
To Next Page
Loading...
