Siemens AG SPR8-230.814.30.03.02 MOBILETT XP Digital
11.05 CS SD 24
Backup 53
Page 53 of 70
Medical Solutions
Writing backup data to CD
After backing up all relevant data to the D:\_Siemens_ folder using the imaging system
service tool, the data in this folder has to be written to CD using Windows XP Explorer.
• Label the blank CD for the backup with the date and "Backup of Configuration" and
number it.
• Select “Explorer” from the SERVICE TOOL menu.
• Start via "START"
¹ Enter the service password (see password list)
• Insert the labeled CD into then CD RW drive of the CXDI PC.
• Copy the “D:\_Siemens_” folder to drive E:\ (CD RW drive).
• Right-click in the right pane of the E:\ drive Explorer window and select "Write these
files to CD".
• Follow the prompts.
¹ The data is saved to CD
• Wait until the write operation is completed.
• Close Explorer.
• Click “Exit” to exit the “SERVICE TOOL”.
• Click “OK” to exit “ADMINISTRATOR SETUP”.
• Switch the MOBILETT XP Digital OFF.
• Close the CXDI PC, secure the CXDI PC transport fastener, and attach the top cover
To Next Page
Loading...
