6.2 NW8204 Maintenance and diagnostic tool
The NW8204 is a powerful maintenance and diagnostic tool, which provides func-
tionalities for (but not limited to) the following:
Downloading firmware;
Setting IP addresses;
Loading default configurations;
Using available diagnostic files.
Note 1: Part of the NW8204 tool is available in Composer (limited functionality).
For details, see the DMS8000 Network, Fire & Intrusion Connectivity Con-
figuration Guide (edms #007083).
Note 2: A similar maintenance and diagnostic tool is available on the Web. Note
that the Web server tool is available for NK8225 only if the NS8210 driver is
installed.
For details, see section 9.2 on p. 48.
6.2.1 NW8204 Hardware requirements
Pentium-class PC hardware, Windows 2000/XP Professional compatible
Ethernet network interface adapter (IEEE 802.3, 10Base-T or 100Base-TX)
10 MB Free Disk Space
128 MB RAM (recommended)
6.2.2 NW8204 Software requirements
Windows operating system
Network Configuration including TCP/IP protocol
6.2.3 NW8204 Installation
You can install the NW8204 tool when you install the DMS. You can also install it
separately on a different PC (such as a service PC) at a later time. If you are in-
stalling MK8000, you launch NW8204 by selecting the NW8204.exe file from the
following directory:
<InstallationDir> \ Communication Layer \ Driver NS8210\NK8210WebServer
\NW8204
For installation on a service PC, do the following:
1. Logon to computer as Administrator (for details ask client’s network administra-
tor).
2. Insert the Installation CD.
3. Select the NK8000 - Support Tools folder.
4. Select NW8204.exe.
Install Shield Wizard opens.
5. Follow the instructions in the Installation Wizard.
To Next Page
Loading...
