Fig. 37 NW8204 main window with open connection (installed GUI)
A
Menu item not displayed in NK8000 Web Server NW8204 tool
B
Menu item not displayed in NK8000 Web Server NW8204 tool
C
History frame
D
Error frame
E
This section not displayed in NK8000 Web Server NW8204 tool
To learn how to access items not displayed in NK8000 Web Server tool, see
section 9.2.
Note: If you don’t close the connection, you will automatically be timed out in five
minutes.
9.1.2 Upload diagnostic files
Diagnostic file purposes:
The purpose of these files is to record messages of what has taken place with the
NK822x to make it easier to determine if something is wrong, or if something im-
portant has taken place.
Diagnostic file descriptions:
DIAGNO.LOG – This file is always present, and contains information about the be-
haviour of the application running on the NK822x. For example, if it wasn’t possible
to open an internal queue during the initialisation phase, that message is saved to
this file.
EEProm.LOG – You create this file by selecting the ‘Save EEProm on File’ button.
This file contains information about the NK822x hardware status stored on the
EEProm. For example, if it wasn’t possible to use the serial interface on COM3 be-
cause the serial add-on board is broken, that message is saved to the EEProm.
To Next Page
Loading...
