5.2 Installation of NE8000 cabinets
5.2.1 NE8000 hardware requirements
Environmental requirements
The cabinets for NK822x should always be installed in a clean and safe environ-
ment, away from dust, high temperature and humidity, vibrations and impacts.
Conditions should match the specific requirements given in the Technical data sec-
tion on p. 57.
NK8000 power requirements
Item Power supply requirement
Input voltage 100-240 Vac, 50-60Hz
Input current 2A
A switch-box including a bipolar cut-out (phase + neutral) is required in the elec-
trical installation.
5.2.2 NE8000 hardware installation
Cabinet installation
1. The cabinet is typically wall-mounted. A proper support must be provided for the
maximum weight (see Technical data on p. 57). Four supporting screws or
hooks (min.10 mm) are required as shown in Fig. 23.
To Next Page
Loading...
