The NK8204 main window appears.
Fig. 35 NK8204 main window (installed GUI)
3. Insert the NK IP Address (NK822x).
Note: Inserting an incorrect IP address causes the following window to appear.
If you receive this message, select ‘OK’ and re-type the IP Address. If you want
to enter the NK822x default IP address 192.168.9.41, you can use the menu
“Set Default IP Address” instead of typing it.
Fig. 36 Incorrect IP Address error message
4. Select ‘Open Connection’.
NW8204 opens a FTP session on the NK822x and lists all files available on the
NK822x flash disk.
To Next Page
Loading...
