Read NK Version
Reads the version of the installed NK822x firmware. NK822x.EXE.
Read NK Date Time
Reads current settings of date and time from the NK822x RTC.
NK Vitality
Opens a window, which shows the current status of the NK822x point image.
Fig. 39 NW8204 Vitality window
The window can be updated manually by pressing the refresh button.
You can use it to check if status changes are sent correctly from NK822x (for ex-
ample from the tamper switch).
Note: This function is only available when logged in as user “admin”.
Read CPU ID
Reads the CPU ID from the DIMM-PC module.
Read Product ID
Reads the Product ID from the NK822x. The Product ID is used to distinguish be-
tween NK8222, NK8223, and NK8225.
Read HW Conf. ID
Reads the HW Configuration ID from the NK822x. The HW Conf. ID is used to
check the HW Configuration from a remote location:
– Serial: NH8002 serial port add-on board installed
– LON: NH8010 PC-104 LON add-on board installed
– Serial + LON: NH8002 + NH8010 installed
To Next Page
Loading...
