3. Select ‘Details’.
4. Check the FTP Server box, then select ‘OK’.
5. Select ‘Next’.
Note: You may be able to ‘Browse’ to select where you want to store the utility.
6. Select ‘Finish’.
If you install IIS after installing MM8000 / MK8000, you must perform the follow-
ing steps to reset the registry keys:
1. Select MM8000 folder Utilities Bat.
2. Double-click NK8210ConfigurationTool.exe.
3. Reboot the PC.
Launching NK8000 Web Server:
The NK8000 Web Server application is launched via the Internet Explorer browser
as follows:
1. Launch Internet Explorer.
2. Enter the following address in the address window:
http://[pcname or servername]/NK8210WebServer/NK8210ServerWeb.dll
Note: Address not case sensitive.
3. Select ‘Go’.
You are logged in as ‘guest’ (default user type) when the NS8210 window ap-
pears.
Note: To change user type (for example from ‘guest’ to ‘admin’), select ‘Hosts’
Login. (See information table below.)
User types: There are two ways you can log in to the NK8000 Web tool.
– Guest user: (Default) User Name = “guest” / Password = “guest” (recom-
mended - Read only privileges);
– Administrative user: Call customer support for username and password.
(Read/Write privileges).
Note: Enter letters in lower case only.
To Next Page
Loading...
