Siemens OpenStage 30 T User Manual

Basic functions
35
Step by Step
Additional forwarding types
This description applies for the following forwarding
types:
• Forwarding for intnl
• Forwarding for extnl
• Forwarding on busy
• Call forward. no reply
• Forwarding on busy/no reply
Programming a forwarding destination activates call for-
warding. If call forwarding is deactivated, the forwarding
destination is deleted at the same time.
Configuring and activating call forwarding
N Open the Program/Service menu Æ page 22.
Confirm the option shown.
Confirm the option shown.
Variable call forwarding is offered first.
Confirm until the required forwarding type Æ page 31 is
shown in the first line.
Example of "Call forward. no reply"
Forwarding type with status.
Select and confirm the option shown.
j Enter the call forwarding destination number.
Confirm, when the phone number is complete. The sta-
tus is set to "FWD-VAR-RNA-BOTH on".
Select and confirm the option shown if you want to
change the 0 seconds preference.
Confirm the option shown.
j Enter the time in seconds after which the call should be
forwarded. You can enter a maximum of 60 seconds. If
the value is, the system forwarding time is used . The
time set here is also used by the "Forwarding on busy/
no reply" forwarding type.
Confirm the option shown.
Destinations?
Call forwarding?
Next forwarding type?
FWD-VAR-RNA-BOTH off
Enter destination:
Save?
Ringing duration until forwarding
Modify?
Save?

Siemens OpenStage 30 T Specifications

General

Brand	Siemens
Model	OpenStage 30 T
Category	Telephone
Language	English