Siemens OpenStage 30 T User Manual

Step by Step
Making calls via multiple lines
96
Identifying the line used
If several lines are occupied at the same time, you can
determine which one you are currently using for a call.
With a programmed function key
S Press the "Line in Use" programmed function key.
Via the menu
N Open the Program/Service menu Æ page 22.
Select and confirm the option shown.
Select and confirm the option shown.
The line number and status of the line currently in use
are displayed.
Making calls on multiple lines alter-
nately
Prerequisite 1: The relevant service personnel have
specified that when you change lines, the lines are hold
and can only be disconnected by replacing the handset
or pressing the release key.
Prerequisite 2: You are connected to multiple parties
via two or more lines. These may be callers (Æ page 89)
or called parties (Æ page 91).
You are making a call, for example, on line 1. The line
key of the station on hold blinks slowly.
T Press the flashing line key 2. The first call party is on
hold on line 1.
T Press the flashing line key 1. The second call party is on
hold on line 2.
You can switch between lines as often as you wish.
More features?
Show used line?

Siemens OpenStage 30 T Specifications

General

Brand	Siemens
Model	OpenStage 30 T
Category	Telephone
Language	English