Siemens OpenStage 30 T User Manual

Basic functions
37
Step by Step
Using callback
Storing a callback
Prerequisite: The internal station called is busy or no-
body answers.
Confirm the option shown.
Accepting a callback
Prerequisite: The internal station called was busy. You
have saved a callback request.
Z Your telephone rings.
^ Lift the handset. You hear a ring tone.
or
n Press the key shown. You hear a ring tone.
Cancel call back
Confirm the option shown.
or Do not answer the call. After ringing four times, the call-
back is canceled.
If your phone belongs to an ONS group (parallel
call Æ page 112), please note the following:
Callback on busy is only signaled on the busy
phone, not in the whole ONS group.
Callback on no reply is entered in the mailbox
(Æ page 20) on all internal system phones in an
ONS group.
Callback?
If the called party was busy, the callback is auto-
matic.
If the called party did not answer, a message is
left in the called party’s mailbox.
If the party has activated call forwarding
(Æ page 31), you will receive the callback from
the call forwarding destination.
Cancel callback?

Siemens OpenStage 30 T Specifications

General

Brand	Siemens
Model	OpenStage 30 T
Category	Telephone
Language	English