Step by Step
Enhanced phone functions
64
Using call forwarding
Automatically forwarding calls
The relevant service personnel can configure different
call forwarding settings in the system for internal and
external calls and activate these settings for your sta-
tion. The following calls may be forwarded
• All calls without restriction
• Calls on busy
• Calls on no reply
Forwarding for all calls without restriction should only
be configure if the station is only used for outgoing calls
(e.g. in an elevator).
If you have configured fixed or variable forwarding and
the manual forwarding destinations are not reachable
(e.g. busy), calls are automatically forwarded to system
forwarding destinations.
Delayed call forwarding
This forwarding type can be configured for initial and/or
second calls.
Initial call
Prerequisite: "Forwarding. no reply" is activated
Æ page 31,
The caller hears the ring tone and is only forwarded to
another station once a set time (Æ page 35) has
elapsed.
Second call
Prerequisite: Second call Æ page 47 and "Forwarding
on busy/no reply" or "Forwarding. no reply" are activated
Æ page 31.
You automatically receive a call waiting tone and infor-
mation about the caller with an incoming second call.
You then have the option of accepting this call before
call forwarding is activated (e.g. if you are waiting for an
urgent call).
Please note the description for programming call
forwarding Æ page 31.
To Next Page
Loading...
Need help?
General