Step by Step
Enhanced phone functions
56
System-wide parking
On HiPath 4000 systems, you can park up to
ten internal and/or external calls and retrieve them on
another phone.
There are two options for parking a call:
• Automatic park
• Manual park
You cannot park calls if:
• All park positions are busy
• The park position you wish to use is busy
• The station is an attendant console
• The call is a consultation call
• The call is in a conference
Automatically parking a call
You can automatically park a call in a free park position
from your phone, and retrieve it on your phone or anoth-
er phone.
Call park
S Press the "System Park" programmed sensor key. The
first free park slot is used and indicated on the display.
The call is now parked.
\ Replace the handset.
Retrieving a parked call
S Press the "System Park" programmed sensor key.
0 ... 9 Enter the park slot number of the parked call and pro-
ceed with the call.
You can also put the call on hold first by confirm-
ing "Consultation?" and then parking the call.
To Next Page
Loading...
