Siemens OpenStage 30 T User Manual

Step by Step
Basic functions
36
Deactivating variable call forwarding
For "Call forwarding for internal" and "Call forwarding for
external":
r Press the lit key. The LED goes out.
For all other forwarding types:
: Open the idle menu Æ page 19.
Select and confirm the option shown.
Call forwarding is deactivated and the destination num-
ber is deleted.
Displays
In idle mode (Æ page 19), the following signals remind
you that call forwarding is activated:
Fixed/variable call forwarding
r The LED lights up.
The number/name of the call forwarding destination is
shown on the display. The "Call forwarding" lights up.
Call forwarding for internal/external
r The LED lights up.
The status is shown in the display. The "Call forwarding"
lights up.
Deact call forwarding?
Call forwarding can also be preconfigured in the
system Æ page 64.
Forwarding to
220870 PETER
Call forwarding is on
There is no display message for the call forward-
ing types "Busy", "No reply" and "Busy/No reply".
The LED key does not light up.

Siemens OpenStage 30 T Specifications

General

Brand	Siemens
Model	OpenStage 30 T
Category	Telephone
Language	English