Step by Step
Special functions in the LAN (not for HiPath 500)
152
Opening a door
If configured (contact your service personnel), you can
also activate the door opener ! page 57 in other
HiPath 3000 communications platforms.
c Open the idle menu ! page 28.
Select and confirm the option shown.
j Enter the (DISA) station number of the HiPath 3000,
where you wish to control the relay.
i or # Confirm your entry.
j Enter the (DISA) station number of the phone you wish
to use to control the relay.
i or # Confirm your entry.
Select and confirm the option shown.
j Z Dial the entrance telephone number.
DISA intern
Open door
To Next Page
Loading...
