Siemens OpenStage 60T - Transferring a Call after a Speaker Call Announcement in a Group

Enhanced phone functions
75
Step by Step
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your ser-
vice personnel), you can use a speaker call (announce-
ment, ! page 142) to announce a call in progress to a
group of users ! page 64.
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
Prerequisite: You are conducting a call.
Confirm. The other party is placed on hold.
v Open the Program/Service menu ! page 40.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter the group’s station number.
[ Announce the call.
When a member of the group accepts the call
! page 56, you are connected to this party.
\ Replace the handset.
or
Select and confirm the option shown
[1]
.
Consultation
Calls g
Speaker call
Transfer
[1] „Differing display view in a HiPath 4000 environment (not for
HiPath 500)” ! Seite 185
If the connection between the two other parties
is not established within 45 seconds, the call
from the first party returns to you (recall).