Siemens OpenStage 60T - Making Calls Using System Speed-Dial Numbers; Dialing with Speed-Dial Keys

Step by Step
Enhanced phone functions
62
Making calls using system speed-dial numbers
Prerequisite: You know the system speed-dial num-
bers (consult your service personnel).
v Open the Program/Service menu ! page 40.
Select and confirm the option shown
[1]
.
j Enter a three-digit speed-dial number.
if nec. Suffix-dialing
j If necessary, you can suffix-dial additional digits
(for example, the user’s extension) at the end of the
saved station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
Dialing with speed-dial keys
Prerequisite: You have configured speed-dial keys
! page 62.
v Open the Program/Service menu ! page 40.
Select and confirm the option shown
[1]
.
* Press the key shown.
j Press the required speed-dial key.
Configure a speed-dial key
You can program the keys
0 to 9 with
ten frequently used phone numbers.
v Open the Program/Service menu ! page 40.
Confirm.
Select and confirm the option shown
[1]
.
* Press the key shown.
j Press the required speed-dial key. If the key is already in
use, the programmed phone number appears on the
screen.
Confirm.
Use speed dialing
[1] „Differing display view in a HiPath 4000 environment (not for
HiPath 500)” ! Seite 185
Use speed dialing
Destinations g
Change Speed Dial
Change