Step by Step
Individual phone configuration
164
Activating/deactivating the ringer
You can see whether the function is activated or deacti-
vated from the corresponding icon in the status bar on
the display ! page 25.
* Hold down the key shown.
Adjusting the volume during a call
[ You are conducting a call.
X Set the volume using the TouchSlider ! page 18.
En-bloc dialing
This function is not supported by HiPath 3000.
If "en-bloc dialing" is activated, you can delete charac-
ters with the return key and re-enter them when enter-
ing a number. The connection is only set up when you
have confirmed "Dial".
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the "en-bloc dialing" entry.
The current setting is shown on the display.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
or
h Press the key shown.
Confirm the option shown.
User
Configuration
Outgoing calls
Deactivated g
Activated g
Save & exit
Save
To Next Page
Loading...
