Step by Step
Enhanced phone functions
76
Sending a trunk flash (not for HiPath 500)
To activate ISDN-type services and features through the
network carrier’s analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Prerequisite: You have set up an external connection.
v Open the Program/Service menu ! page 40.
Select and confirm the option shown.
Select and confirm the option shown
[1]
.
j Enter the service code and/or telephone number.
Calls g
Trunk flash
[1] „Differing display view in a HiPath 4000 environment (not for
HiPath 500)” ! Seite 185
To Next Page
Loading...
