Siemens RWF55.50A9 - 8 Configuration ConF

49/93
Building Technologies Division User Manual RWF55... CC1U7867en
Infrastructure & Cities Sector 8 Configuration ConF 05.11.2013
8 Configuration ConF
Here, the settings (e.g. acquisition of measured value or type of controller) required
directly for commissioning a certain plant are made and, for this reason, there is no
need to change them frequently.
Basic display
7867d12e/0712
ESC
>2 s
or timeout
Enter
O
Pr
Enter
User level OPr
Navigation principle
Enter
ESC
One level
back
One level
down
Next/previous parameter
PArA
Enter
Parameter level PArA
HYS3
HYS6
At1 Ht1 At2 Ht2
Heating controller:
Cooling controller:
, , , ,
, ,
, ,
HYS1 HYS2
HYS4 HYS5
Pb1 dt rt db tt
, , , ,
Enter
Configuration level ConF
InP
Cntr
rAFC
AF
OutP
binF
diSP
IntF
Analog inputs
Controller
Thermal shock protection
Alarm function
Controlling outputs
Binary inputs
Display
Interface
C
on
F
b
Figure 27: Configure
Access to this level can be locked.

Reference!
See chapter 8.9 Display diSP.

Note!
The following tables show the default settings in columns Value/selection and
Description in bold printing.