Siemens RWF55.50A9 - Page 57

57/93
Building Technologies Division User Manual RWF55... CC1U7867en
Infrastructure & Cities Sector 8 Configuration ConF 05.11.2013
Parameter Value/
selection
Description
Function
FnCt
Function
0 Without function
1
lk1 monitored input InP1
2
lk2 monitored input InP1
3
lk3 monitored input InP1
4
lk4 monitored input InP1
5
lk5 monitored input InP1
6
lk6 monitored input InP1
7
lk7 monitored input InP1
8
lk8 monitored input InP1
9
lk7 monitored input InP2
10 lk8 monitored input InP2
11
lk7 monitored input InP3
12
lk8 monitored input InP3
Limit value
AL
Alarm value
-1999...
0...
+9999
Limit value or deviation from setpoint to be monitored (see alarm functions
lk1 to lk8: limit value AL).
Limit value range for lk1 and lk2: 0...9999
Switching difference
HYSt
Hysteresis
0...
1...
9999
Switching difference in relation to limit value (see alarm functions lk1 to lk8:
hysteresis HYSt).
Response by Out of
Range
ACrA
Response by out of
range
0
1
Switching state in the case of measuring range overshoot or undershoot (Out
of Range).
Switched-off
ON