Siemens S7-300 - 9.2 SM 336; AI 6 x 13 Bit

Web diagnostics
11.3 Diagnostics pages of the CP
Configuring and commissioning S7 CPs for Industrial Ethernet
182 Configuration Manual, 09/2013, C79000-G8976-C182-13
Note:
Connections can be configured by configuration in STEP 7 or by programming in the user
program (program block IP_CONFIG).
Note
PROFINET IO
When using PROFINET IO, UDP ports are open due to the system.
"ISO Transport", "ISO-on-TCP", "TCP", "UDP", "SMTP" tabs
Parameters
Function
Relevant protocol
Connection type (ISO transport, ISO-on-TCP, TCP, UDP, SMTP, S7)
Conn no.
Connection number from the configuration
All
Conn. name
Connection name from the configuration
All
Local IP address
IP address of the local interface
ISO-on-TCP, TCP, UDP, S7, SMTP
Local MAC address
MAC address of the local interface
ISO Transport, S7
Remote MAC address
MAC address of the connection partner
ISO Transport, S7
Partner IP address
IP address of the connection partner
ISO-on-TCP, TCP, UDP, S7
Local TSAP
Local TSAP from the configuration
ISO Transport, ISO-on-TCP, S7
Partner TSAP
TSAP of the connection partner
ISO Transport, ISO-on-TCP, S7
Local port
Local port from the configuration
TCP, UDP
Partner port
Port of the connection partner
TCP, UDP, SMTP
Assigned CPU The CPU assigned in the configuration SMTP
E-mail server
IP address of the e-mail server
SMTP
Connection status Current connection status:
• Established
• Terminated
• Active connection establishment running
• Passive connection establishment running
All
Interface
Specifies the connection path on the local station.
All
Statistics (of the selected connection)
• Mode
• Messages sent
successfully
• Messages not sent
successfully
• Receive messages
Statistical information on the particular entry ISO transport, ISO-on-TCP, TCP, UDP
Messages blocked due to
the access LOCK
Number of messages locked by the AG_LOCK
program block
TCP