Web diagnostics
11.3 Diagnostics pages of the CP
Configuring and commissioning S7 CPs for Industrial Ethernet
190 Configuration Manual, 09/2013, C79000-G8976-C182-13
Table 11- 3 Meaning of the colored connections in the target/actual topology:
green
The current actual connection matches the configured target
connection.
Connections detected
red Mismatch between the current actual connection and the
configured target connection (e.g., port interchanged).
-
yellow Connection diagnostics not possible. Causes:
• Malfunction of communication with a device (e.g. cable
was removed)
• Connection to a passive component
• Connection to devices/PROFINET devices on a different
IO controller or IO subsystem.
-
① Configured and accessible PROFINET nodes
Configured and accessible PROFINET nodes are displayed in dark gray. Display the ports
used to connect the PROFINET nodes of a station.
To Next Page
Loading...
