Siemens SCALANCE W780

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
182 Configuration Manual, 03/2015, C79000-G8976-C267-08
Description
The page contains the following boxes:
●
Time Manually
Enable or disable manual setting of the time. If you enable the option, the "System Time"
input box can be edited.
●
System Time
Enter the date and time in the format "MM/DD/YYYY HH:MM:SS".
●
Use PC Time
Click the button to use the time setting of the PC.
●
Last Synchronization Time
This box is read-only and shows when the last time-of-day synchronization took place. If
no time-of-day synchronization was possible, the box displays "Date/time not set".
●
Last Synchronization Mechanism
This box displays how the last time-of-day synchronization was performed.
– Not set
The system time was not set.
– Manual
Manual time setting
– SNTP
Automatic time-of-day synchronization with SNTP
– NTP
Automatic time-of-day synchronization with NTP
– SIMATIC
Automatic time-of-day synchronization using the SIMATIC time frame
●
Daylight Saving Time
Shows whether the daylight saving time changeover is active.
– active (offset +1 h)
The system time was changed to daylight saving time; in other words an hour was
added. You can see the current system time at the top right in the selection area of the
WBM.
The set time continues to be displayed in the "System Time" box.
– inactive (offset +0 h)
The current system time is not changed.
Procedure
1. Enable the "Time Manually" option.
2. Click in the "System Time" input box.