Assignment of an IP address
4.5 Address assignment with STEP 7
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
58 Configuration Manual, 03/2015, C79000-G8976-C267-08
Address assignment with STEP 7
In STEP 7, you can configure the topology, the device name and the IP address; in other
words, an IP address is specified for the MAC address of the IWLAN device. If you connect
the unconfigured IWLAN device to the controller, the controller assigns the configured device
name and the IP address to the IWLAN device automatically.
For further information on the assignment of the IP address using STEP 7 V5.x and earlier,
refer to the documentation "Configuring Hardware and Communication Connections STEP
7", in the section "Steps for Configuring a PROFINET IO System".
For further information on assigning the IP address using STEP 7 as of V13, refer to the
online help "Information system", section "Addressing PROFINET devices".
To Next Page
Loading...
