Siemens SCALANCE W780

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
192 Configuration Manual, 03/2015, C79000-G8976-C267-08
5.5.12.5
NTP Client
Automatic time-of-day setting with NTP
If you require time-of-day synchronization using NTP, you can make the relevant settings
here.
Description
The page contains the following boxes:
●
NTP Client
Select this check box to enable automatic time-of-day synchronization with NTP.
●
Current System Time
This box shows the current date and current normal time received from the server. If you
specify a time zone, the time information is adapted accordingly.
●
Last Synchronization Time
This box is read-only and shows when the last time-of-day synchronization took place.
●
Last Synchronization Mechanism
This box displays how the last time-of-day synchronization was performed. The following
methods are possible:
– Not set
The system time was not set.
– Manual
Manual time setting
– SNTP
Automatic time-of-day synchronization with SNTP