Siemens SCALANCE W780

Description
2.5 Requirements for installation and operation of SCALANCE W700 devices
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
28 Configuration Manual, 03/2015, C79000-G8976-C267-08
2.5
Requirements for installation and operation of SCALANCE W700
devices
Requirements for installation and operation of SCALANCE W700 devices
A PG/PC with a network connection must be available in order to configure
SCALANCE W700 devices. If no DHCP server is available, a PC on which the Primary
Setup Tool (PST) is installed is necessary for the initial assignment of an IP address to the
SCALANCE W700 devices. For the other configuration settings, a computer with Telnet or a
Web browser is necessary.