Siemens SCALANCE W780

Configuring with Web Based Management
5.4 "Information" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
99
5.4.6
Faults
Error status
This page displays any errors that occur. Errors of the "Cold/Warm Start" event can be
deleted following confirmation.
If there are no more unanswered error/fault messages, the fault LED goes off.
The time calculation always begins after the last system start. When the system is restarted,
a new entry with the type of restart is created in the fault memory.
Description
The page contains the following boxes:
●
No. of Signaled Faults
Indicates how often the fault LED lit up and not how many faults occurred.
●
"Reset Counters" button
The number is reset with this button.
The table contains the following columns:
●
Fault Time
Shows the time the device has been running since the last restart when the described
fault occurred.
●
Fault Description
Display of the fault status for the device.
●
Clear Fault State
To delete errors of the "Cold/Warm Start" event, click the Clear Fault State" button.