Siemens SCALANCE W780

Configuring with Web Based Management
5.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
278 Configuration Manual, 03/2015, C79000-G8976-C267-08
●
Shared Secret Confirmation
Confirm the password.
●
Max. Retransmissions
Enter the maximum number of connection attempts.
●
Primary Server
Specify whether or not this server is the primary server.
– yes: Primary server
– no: Backup server.
●
Status
With this check box, you can enable or disable the RADIUS server
Procedure
Entering a new server
To display a new server, follow the steps below:
1. In the relevant row, enter the following data in the input boxes:
– IP address or FQDN name of the RADIUS server.
– Port number of the input port
– Password
– Confirmation of the password
– Maximum number of transmission retries
– Primary server
2. Click the "Set Values" button.
Modifying servers
1. In the relevant row, enter the following data in the input boxes:
– Server IP address
– Port number of the input port
– Password
– Confirmation of the password
– Maximum number of transmission retries
– Primary server
2. Click the "Set Values" button.
Repeat this procedure for every server whose entry you want to modify.