Configuring with Web Based Management
5.10 "iFeatures" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
288 Configuration Manual, 03/2015, C79000-G8976-C267-08
In both modes, the table has the following columns:
●
Specifies the WLAN interface to which the settings relate.
●
Enable or disable iPCF mode. For PNIO communication, we recommend that you enable
the iPCF mode. By enabling iPCF, the data rates provided by the access point are
adapted. We strongly recommend that you retain the default setting for the data rates
(802.11 a/b/g = 12 Mbps and 802.11n = MCS 2).
To Next Page
Loading...
