Introduction
2.1 Introduction
Warning
When used under hazardous conditions (zone 2), the media converter of the SCALANCE X-
100 series must be installed in an enclosure.
In the scope of ATEX100a (EN 60079-15), this enclosure must at least comply with IP54
according to EN 60529.
WARNING – EXPLOSION HAZARD: DO NOT DISCONNECT EQUIPMENT WHEN A
FLAMMABLE OR COMBUSTIBLE ATMOSPHERE IS PRESENT.
:
Note
The specified approvals apply only when the corresponding mark is printed on the product.
Industrial Ethernet Media Converters SCALANCE X-100 Series
2-2 Commissioning Manual, 07/2008, A2B00051521A
To Next Page
Loading...
Need help?
General
