3VL molded-case circuit breakers
System Manual, 03/2009, 110 0110 - 02 DS 01
13
Product-specific information
2
2.1 Important notes
Validity
This manual applies to SENTRON circuit breakers with the following designations:
● VL160X
● VL160
● VL250
● VL400
● VL630
● VL800
● VL1250
● VL1600
Standards and certifications
The SENTRON VL circuit breakers comply with the standards:
● IEC 60947-2 / DIN EN 60947-2 (VDE 0660-101)
● IEC 60947-1 / DIN EN 60947-1 (VDE 0660-100)
● Isolating features in accordance with IEC 60947-3 / EN 60947-3 (VDE 0660-107)
● Network disconnection features for stopping and shutting down in an emergency (main
switch and EMERGENCY-OFF switch) in accordance with IEC 60204-1 / DIN EN 60204-
1 (VDE 0113-1)
Disclaimer of liability
The products described here were developed to perform safety-oriented functions as part of
an overall installation or machine. A complete safety-oriented system generally features
sensors, evaluation units, signaling units, and reliable shutdown concepts. It is the
responsibility of the manufacturer to ensure that a system or machine is functioning properly
as a whole. Siemens AG, its regional offices, and associated companies (hereinafter referred
to as "Siemens") cannot guarantee all the properties of a whole plant or machine that has
not been designed by Siemens.
To Next Page
Loading...
