Functions
5.2 Voltage protection
3VL molded-case circuit breakers
62 System Manual, 03/2009, 110 0110 - 02 DS 01
Designation of the connecting cables
All types Pos. 1 Pos. 2
Cable designations D1 D2
5.2.2 Shunt release
As a shunt release, the circuit breaker is used for remote protection
Shunt release
It is designed for short-time operation and is therefore
equipped with an interrupt contact for self-protection.
Shunt releases are installed in the right-hand accessory
compartment of the SENTRON VL circuit breakers.
Designation of the connecting cables
All types Pos. 1 Pos. 2
Identifier C1 C2
To Next Page
Loading...
