Description
2.4 Digital inputs and outputs
PAC1020
16 Equipment Manual, 05/2020, L1V30610008B-01
2.4 Digital inputs and outputs
The power monitoring device features:
• One passive digital input
• One passive digital output
2.4.1 Digital input
The integral digital input makes it possible to detect the status of the connected sensor.
Figure 2-1 Block diagram: Digital input
Wiring
An external voltage of up to max. 30 V (typically 24 V DC) must be connected to terminal DIC.
Figure 2-2 Digital input with switch and external power supply at terminal DIC
To Next Page
Loading...
