Operation
6.1 Device interface
PAC1020
46 Equipment Manual, 05/2020, L1V30610008B-01
6.1.3.2 Main menu level
In this menu level, all available measured variables are listed without measured values. The
main menu level also has a "SETTINGS" selection menu item which can be used to configure
the device.
• The key returns the device to the measured value level.
• The and keys can be used to scroll between menu items.
• The key confirms the selection made and switches the device to the measured value
level.
In the "SETTINGS" menu item, the device is set to the setting level by actuating the key.
6.1.3.3 Setting level
At the setting level the device can be configured. At this menu level, all settable parameters
are listed.
• The key returns the device to the main menu level.
• The and keys can be used to scroll through the settable parameters.
• The key confirms the selection made and takes the device to the editing level.
6.1.3.4 Editing level
At the editing level, it is possible to modify the device parameters.
• The key returns the device to the setting level.
• The and keys can be used to navigate to the value to be changed.
• The or key can be used to select a value for editing.
• The and keys or the and / keys are used to change the
value.
• The key confirms the change and switches the device to the measured value level.
To Next Page
Loading...
