PAC1020
Equipment Manual, 05/2020, L1V30610008B-01
63
9.1 Cleaning
Clean the display and keypad regularly. Use a dry cloth for this.
Damage due to detergents
Detergents can damage the device. Do not use detergents.
9.2 Firmware update
The power monitoring device supports firmware updates.
Use the powerconfig configuration software to update the firmware. Additional information
on updating the firmware can be found in the online help for powerconfig.
You can protect the update function, like all write accesses, with a password.
Power failure during a firmware update renders the device unable to function.
The firmware update takes several minutes. Connect the device to a fail-safe power supply
before updating the firmware.
If the power fails despite this security measure, try to restart the firmware update of the PAC
power monitoring device in powerconfig.
To Next Page
Loading...
