Siemens SENTRON PAC1020 - Resetting

Parameterizing
7.2 Parameterizing via the operator interface
PAC1020
Equipment Manual, 05/2020, L1V30610008B-01
53
Current input
Selection Range Factory
setting
CT PRIMARY
Primary current of the current transformers
1 … 99999 A
50 A
CT SECONDARY
Secondary current of the current transformers
• 1 A
• 5 A
5 A
DISPLAY RANGE
Display range setting
Freely adjustable
1 … 99999 A
50 A
• CURRENT DIREC L1
• CURRENT DIREC L2
• CURRENT DIREC L3
Inverse evaluation of the current flow direction
separately for each phase.
• ON: Direction of current flow is inverted.
The device interprets the current flow direc-
tion as opposite to the wiring.
• OFF: The device interprets the current flow
direction to match the wiring.
OFF
DISPLAY I(n)
Display of I(n) current
• ON: I(n) is displayed
•
OFF: I(n) is not displayed
ON