Siemens SIMATIC C7-613 - Page 183

Configuration DBs
C-7
C7-613 Control System
A5E00138934-03
Table C-3 Structure of DB for Process Screens, continued
Address DescriptionTypeName
148 SCREEN[0].PIC_VAR[1].ACCESS CHAR Data type
“X”=BOOL
“C”=CHAR
“B”=BYTE
“I”=INT
“L”=DINT
“W”=WORD
“D”=DWORD
149 SCREEN[0].PIC_VAR[1].BITNO BYTE Bit number
0 to 7; must be 0 for all data types
except “X”.
150 SCREEN[0].PIC_VAR[1].UPPERLIM DINT Upper limit
If limit monitoring is switched on, the
variable is monitored at the input for
values > the upper limit. If the limit is
exceeded, a corresponding system
message is output.
154 SCREEN[0].PIC_VAR[1].LOWERLIM DINT Lower Limit
If limit monitoring is switched on, the
variable is monitored at the input for
values < the lower limit. If the lower
limit is exceeded, a corresponding
system message is output.
158 to
175
SCREEN[0].PIC_VAR[2]. Description for Variable 2
176 to
193
SCREEN[0].PIC_VAR[3]. Description for Variable 3
194 to
211
SCREEN[0].PIC_VAR[4]. Description for Variable 4
212 to
229
SCREEN[0].PIC_VAR[5]. Description for Variable 5
230 to
247
SCREEN[0].PIC_VAR[6]. Description for Variable 6
248 to
265
SCREEN[0].PIC_VAR[7]. Description for Variable 7
266 to
283
SCREEN[0].PIC_VAR[8]. Description for Variable 8
284 to
535
SCREEN[1]... Screen description for Screen 1
to
15908 to
16159
SCREEN[63]... Screen description for Screen 63