Siemens SIMATIC CloudConnect CC7 Series - Page 134

Approvals
SIMATIC CC7
134 Operating Instructions, 10/2019, C79000-G8976-C503-02
FM
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
FM16US0205X
Equipment rating:
Class I, Division 2, Group A, B, C, D, Temperature Class T4, Ta = 0..50/70 °C
*
Class I, Zone 2, Group IIC, Temperature Class T4, Ta = 70 °C
ANSI/ISA-61010-1 (82.02.01)
* Remember that the permitted ambient temperature depends on the mounting position; see
section Technical specifications - CloudConnect 712 (Page 125).
Ta: Refer to the temperature class on the type plate
Note the conditions for the safe deployment of the product according to the section General
notices on use in hazardous areas according to UL HazLoc / FM (Page 33).
Australia - RCM
The product meets the requirements of the AS/NZS 2064 standards (Class A).
MSIP 요구사항 - For Korea only
A급 기기(업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정 외의 지역에서 사용하는것을 목적으로 합니다.
Note that in terms of the emission of interference, this device corresponds to limit class A.
This device can be used in all areas except for residential environments.
Current approvals
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
If you require a list of the current approvals for individual devices, consult your Siemens
contact or check the Internet pages of Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15248/cert)