Siemens SIMATIC CloudConnect CC7 Series - Page 91

Configuration
4.9 Cloud configuration
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
91
● Apply
Applies the current settings in the topic editor.
User data format - JSON PubSub
{ "Timestamp": "<PUBLISH_TIMESTAMP>", "DataItems": [
<DATAPOINTS_BEGIN SEPARATOR=,\n>: { "Variable": "<DATAPOINT_NAME>",
"Type": "<DATAPOINT_TYPE>", "Value": "<DATAPOINT_VALUE>",
"QualityCode": "<DATAPOINT_QUALITY_CODE>" }
<DATAPOINTS_END>
] }
User data format - JSON
{
"Timestamp": "<PUBLISH_TIMESTAMP>",
<DATAPOINTS_BEGIN SEPARATOR=,\\n>"<DATAPOINT_NAME>":
{ "Value": "<DATAPOINT_VALUE>", "Station": "<STATION_NAME>",
"Type": "<DATAPOINT_TYPE>", "QualityCode": "<DATAPOINT_QUALITY_CODE>"
}<DATAPOINTS_END>
}
User data format - XML
<Timestamp><PUBLISH_TIMESTAMP></Timestamp>
<DATAPOINTS_BEGIN SEPARATOR=\\n><<DATAPOINT_NAME>><Value><DATAPOINT_VALUE></Value>
<Station><STATION_NAME></Station><Type><DATAPOINT_TYPE></Type>
<QualityCode><DATAPOINT_QUALITY_CODE></QualityCode><</DATAPOINT_NAME>>
<DATAPOINTS_END>
User data format - MindConnect IoT Extension
<DATAPOINTS_BEGIN SEPARATOR=\\n>200,<DATAPOINT_NAME>,<GROUP>,<DATAPOINT_VALUE>,
<ADDITIONAL_ATTRIBUTE>,<DATAPOINT_QUALITY_CODE><DATAPOINTS_END>
Code: Syntax and meaning
Description of the syntax
The description of the individual keys is structured as follows:
●
Name
<Syntax>
Meaning
Code key
The code for formatting the user data can consist of the following keys listed below.
If you want to use not only the keys for the transfer of user data but also want to add text,
you can add the text in front of or after a key.